Skip to content

Heat Pump Hot Water Valentine

Heat pump hot water in Valentine heats your tank with warmth drawn from the outside air, so it uses much less power than a standard electric element. We price the whole install as a fixed figure and can connect a temporary hot water tank while your new unit is on its way.

Where this fits. The hot water hub covers whether to repair or replace any system, and this page deals with heat pumps only. For everything else we do, see the plumber in Valentine home page.

Licensed plumbers and gas fitters · NSW Lic. 359278C

Last updated September 2026

Storage hot water unit fitted against a house wall
Newly installed storage hot water unit

Why do homes here suit a heat pump?

A compressor and a small fan pull heat out of the surrounding air and pass it into the water, the same principle as a fridge but in the other direction.

Mild winters

Area weather records show 0.1 frost days a year on average, and heat pumps work best in exactly that kind of climate.

Big households

Census figures show 2.7 people in the average household here and 55.7 per cent of dwellings carrying four bedrooms or more, so the tank gets a heavy workout each morning.

Tired old units

The late-1980s and 1990s boom filled the suburb with brick-veneer family homes, and plenty of the tanks fitted then have reached the end of their working life. A heat pump replacement starts a fresh clock and lowers the power bill at the same time.
Electric storage hot water unit after installation

What does the install involve?

The install runs in four steps:

  1. 1

    Site check

    We look at where the current tank sits, how air moves around the proposed spot and where the condensate can drain.

  2. 2

    Old tank out

    The storage tank is isolated, emptied and carted away.

  3. 3

    New unit in

    The heat pump goes on its base, the water connections are made to the existing pipes, and the condensate line runs to an approved drain point.

  4. 4

    Commissioning

    We put the unit through a full heating cycle, check the temperature at the taps and show you the controls.

What shapes the install price?

Four points move it:

  • The size of the tank A larger household needs a bigger unit, and the price of the unit rises with it.
  • Where it goes Setting the new unit where the old tank stood is simpler than moving it to another wall, which adds pipe and labour.
  • The power supply If the supply needs upgrading first, an electrician does that part, and we raise it before you commit.
  • Taking the old tank away Draining, removing and disposing of the old unit is included in the price.

Lakeside blocks and the foreshore air

Placement matters near the water

Valentine faces the lake from its eastern side, and the waterfront houses by Dilkera Avenue sit in salty air that is hard on outdoor metal. A heat pump going in on those blocks needs a position with good airflow and some shelter from the lake breeze.

Most houses are later builds

Away from the shore, the suburb is mainly brick-veneer and rendered homes built after the late 1980s, plus an older 1960s and 70s group. The first storage tanks in the older of those houses are now overdue for replacement. Wherever the house sits, the site check in step one covers airflow, drainage for the condensate and a spot that gives the unit a long life.

What customers say

[The plumber] & his young helper were courteous, well mannered & competent when replacing the solar hot water station pump at my property
Jennifer

When we're not the right call

The power side

A new heat pump may need a dedicated circuit or more capacity at the meter box, and that wiring belongs to a licensed electrician. We point you to one rather than pricing electrical work.

Gas instead

If what you really want is continuous-flow gas, the gas fitting hub covers the gas side.

Water under the old tank

A wet slab under the old unit should be traced before the new one goes down, and the leak detection page explains how.

Heat pump questions from around the lake

Is a heat pump hot water unit worth it in Valentine's climate?

It suits it well. Area weather records show frost here less than one day a year, and a heat pump keeps its efficiency in mild, damp winters because it draws heat from the air rather than burning anything. It uses less power than an element tank, and you know the install price before we start.

Can a heat pump replace my old electric storage tank?

In a lot of cases, yes. The brick-veneer houses built here from the late 1980s may still have their first electric tank, and a heat pump can take its place on the same water connections. We look at the spot, the airflow and the power supply first, then price the change.

Does the salt air near the lake affect a heat pump?

It can. Blocks near the shore get brackish air on anything metal left outside, so the position and a sheltered spot matter for how long the unit lasts. We go through both when we quote, and the install carries our 365-day warranty on all work.

How long does a heat pump install take?

Swapping onto the old tank's position is the quicker job, because the water pipes are already there. Moving the unit to a new spot, or needing an electrician to upgrade the power supply first, adds time, and either one is raised before you agree to anything.

Book A Heat Pump Quote

Call (02) 4093 0558 or send the form below. Available 24/7, you see a fixed figure ahead of any work, and every job carries our 365-day warranty on all work.

Call (02) 4093 0558

Request a callback

Leave a name and number and a plumber will ring you back.

We use your details only to call you back about this job. See our privacy policy.

Call (02) 4093 0558 Get a quote